Follow an undersaturated oil down to its saturation pressure

An oil discovered 870 psi above its saturation pressure: its compressibility, how Bo and viscosity change on the way down, the oil in place at discovery, and how much the oil's own expansion recovers before it reaches that pressure.

Open in the workbench

Engineering use cases UC-PVT-006 (Evaluate Undersaturated Reservoir) and UC-PVT-004 (Calculate OOIP from Volumetrics).

Above the bubble point no gas comes out of solution: Rs holds at its bubble-point value, and Bo rises as the pressure falls only because the oil expands. Vasquez and Beggs (1980) give that compressibility as co = (−1433 + 5 Rs + 17.2 T − 1180 γg + 12.61 API) / (10⁵ p), and OilVolumeFactor.UnderSaturated applies it as Bo = Bob · exp[−co (p − pb)]. The viscosity rises with pressure above Pb by the Vasquez–Beggs power law on the saturated value.

What an engineer learns from it: the bubble point is 3,634 psia, so at 4,500 psia the oil is 866 psi undersaturated. co is 1.24 × 10⁻⁵ 1/psi there, Bo falls from 1.4525 at Pb to 1.4370 at Pi, and the viscosity rises from 0.48 to 0.52 cP. The oil in place uses Boi, not Bob: 25.91 MMSTB against the 25.64 that Bob would give, 1 % more. Expansion alone recovers (Bob − Boi)/Bob ≈ co (Pi − Pb), about 1.1 % of the oil, before the reservoir reaches its bubble point; that is why an undersaturated reservoir without an aquifer loses pressure fast at first.

Field units: °API, gas gravity against air, °F, psia, 1/psi, rb/STB, cP, acres and ft. The compressibility formula holds for P > Pb only; below it, use the saturated relations (OilCompressibility.SaturatedByVillenaLanzi1985).

Source

using System;
using System.Linq;
using Team76.Engineering.Core.Measures;
using Team76.Engineering.PVT.Correlations;

public class S : ICalcScript
{
    public ScriptResult Run(ICalcContext ctx)
    {
        // 35 °API oil, 0.75 gas gravity, 800 scf/STB, 200 °F; the reservoir starts at 4,500 psia.
        var gg = GasSpecificGravity.From(0.75);
        var api = ApiGravity.From(35);
        var t = Temperature.FromDegF(200);
        var rsb = SolutionRelation.FromScfPerStb(800);
        var pi = Pressure.FromPsi(4500);

        var pb = BubblePointPressure.ByVasquezBeggs(gg, api, rsb, t);
        var bob = OilVolumeFactor.SaturatedByVasquezBeggs1980(gg, api, rsb, t);
        var muDead = OilViscosity.DeadByEgbogah1983(api, t);
        var mub = OilViscosity.SaturatedByBeggsRobinson1975(rsb, muDead);

        // Above Pb: Rs is fixed, the oil compresses (Vasquez-Beggs co), its viscosity rises.
        var co = OilCompressibility.UnderSaturatedByVasquezBeggs1980(rsb, gg, api, t, pi);
        var boi = OilVolumeFactor.UnderSaturated(bob, co, pb, pi);
        var mui = OilViscosity.UnderSaturatedByVasquezBeggs1980(pi, pb, mub);

        // Volumetric oil in place at Pi: 640 acres, 50 ft, 20 % porosity, 25 % water.
        var stoiip = 7758 * 640 * 50 * 0.20 * (1 - 0.25) / boi.BblPerStb;

        // Expansion recovery from Pi down to Pb: Np/N = (Bob − Boi) / Bob.
        var recovery = (bob.BblPerStb - boi.BblPerStb) / bob.BblPerStb;

        var table = new[] { 4500.0, 4250, 4000, 3800, 3650 }
            .Select(p =>
            {
                var at = Pressure.FromPsi(p);
                var c = OilCompressibility.UnderSaturatedByVasquezBeggs1980(rsb, gg, api, t, at);
                var bo = OilVolumeFactor.UnderSaturated(bob, c, pb, at);
                var mu = OilViscosity.UnderSaturatedByVasquezBeggs1980(at, pb, mub);
                return new object[] { p, Math.Round(c.PerPsi() * 1e6, 2), Math.Round(bo.BblPerStb, 4), Math.Round(mu.CP, 3) };
            })
            .ToList();

        return ctx.Result()
            .Set("Pb (psia)", Math.Round(pb.Psi))
            .Set("co at Pi (1/psi)", co.PerPsi())
            .Set("Bo at Pb (rb/STB)", Math.Round(bob.BblPerStb, 4))
            .Set("Bo at Pi (rb/STB)", Math.Round(boi.BblPerStb, 4))
            .Set("μo at Pb (cP)", Math.Round(mub.CP, 3))
            .Set("μo at Pi (cP)", Math.Round(mui.CP, 3))
            .Set("STOIIP at Pi (MMSTB)", Math.Round(stoiip / 1e6, 2))
            .Set("Recovery by expansion to Pb (%)", Math.Round(recovery * 100, 2))
            .Set("Above the saturation pressure", new ScriptTable(["P (psia)", "co (1e-6/psi)", "Bo (rb/STB)", "μo (cP)"], table));
    }
}